SCENARIA SE 128

Advanced Features

Optimized Positioning

LATERAL SHIFT TABLE, ± 8CM

IntelliCenter Auto-Lateral Shift Table is the only standard table that can shift up to ± 8cm laterally (16cm total range) to:

• Assist patient positioning
• Reduce dose
• Improve spatial resolution

MULTI-BOWTIE FILTERS

Multi-Bowtie filter size selection, based on anatomy to be imaged, reduces radiation dose in areas outside the filter’s field of view. When used together with the auto lateral shift table, off-center anatomy can be brought to iso-center and the smallest bow-tie filter utilized.

Patient Comfort

HIGHER DATA SAMPLING RATE

SCENARIA’s higher data sampling rate provides faster anatomic coverage without sacrificing image quality and reduces motion artifacts.

WIDE 75CM GANTRY APERTURE & THIN 88CM GANTRY DEPTH

75cm Aperture combined with 88cm thin-gantry-profile provides greater openness for easier patient access.

550 LBS. TABLE WEIGHT CAPACITY

Higher standard weight capacity to accommodate larger patients up to 250 kg (550 lbs.).

LOW MINIMUM TABLE HEIGHT

46cm (18 in) minimum table height eases access for the elderly and patients transferring from a wheel chair.

Iterative Reconstruction

INTELLI IP AND INTELLI IP ADVANCED

Intelli IP and Intelli IP Advanced are Fujifilm’s latest proprietary processing engines that makes use of adaptive iterative reconstruction processes in both projection and image space. Their use will reduce pixel noise at a given level of mAs as compared to filtered backprojection without Intelli IP/ Intelli IP Advanced.

INTELLI EC PLUS

Fujifilm’s proprietary 3D mA modulation technology, Intelli EC, automatically modulates mA to lower individual patient dose levels depending on patient anatomy and size and considering the level of iterative reconstruction selected. Intelli EC Plus can be set to provide real-time control of mA, to achieve a constant Noise Standard-Deviation in the resulting images.

HIGHER DATA SAMPLING RATE

SCENARIA’s higher data sampling rate provides faster anatomic coverage without sacrificing image quality and reduces motion artifacts.

Lower Dose

REDUCED kV

Four settings support lower kV and dose based on individual patient size.

Lower kV provides lower dose for small and pediatric patients.

• 80kV
• 100kV
• 120kV
• 140kV

REDUCED DOSE FOR CARDIAC CTA

ECG Dose Modulation reduces mA by up to 80% during the cardiac phases of a retrospectively gated exam that are not intended for image reconstruction

DOSE REPORTING AND AWARENESS

Scenaria SE provides both DICOM Dose Structured Report and a Simple Dose Report to satisfy the full range of your IT and physician reading dose reporting needs. And, Scenaria SE includes Dose Check, compliant with NEMA XR-25, to monitor for exam doses that may exceed notice or alert levels

AXIAL SNAP-SHOT IMAGING

Pulses the X-ray “on” only during a phase of the cardiac cycle using prospectively gated step-and-shoot cardiac scanning – reducing radiation dose.

Technology

Scan Parameters

Rotation times (seconds): 0.35, 0.4, 0.5, 0.75, 1.0, 1.5, 2.0
Data collection speed: 2880 views per second
Minimum Slice thickness (mm): 0.625
FOV (mm): 20-500
Max scan range (in/mm): 79/2000
Max scan rotations: 100
Volume scan pitch: 0.56 to 1.578

Scan Acquisition Types

Scanogram with real-time display – AP & Lateral
Normal scan - axial mode
Volume scan - helical mode
Dynamic Scan mode for Time Density Analysis
ECG Scan modes (option), Retrospective and Prospective

Gantry

Gantry aperture: 75cm
Gantry tilt: 30 degrees
Gantry Display: 10.4 inch LCD
Scan locolizer

X-ray Detector

Type: Solid state ceramic
Coverage: 4cm with 64 rows
Detector elements: 64 x 888

X-ray Tube

Anode heat capacity: 7.5MHU
Anode max. cooling rate: 1,386kHU/min
Tube cooling: Oil/Air
Focal Spot (mm): 0.7 x 0.8; 1.2 x 1.4

Header: X-ray Generator

Output: 72kW
kVp selection: 80, 100, 120, 140kV
mA selection: 10-600mA (5mA steps)

Patient Table

Table-top width: 19in (475mm)
Table weight capacity: 550 lbs (250kgs)
Horizontal accuracy: ±0.25mm
Vertical travel range: 46.5cm to 105cm
Lateral Shift Motion ± 8cm (16cm total range)
Scannable range 200cm

Operator's Console

Display: single 24-inch LCD widescreen monitor
Display resolution: 1920 x 1200
UPS for console and image processor

Image Reconstruction

Matrix: 512 x 512
Image reconstruction time: up to 50 images/second (depending on protocol)
Immediate image preview
CT number range: -32,768 to +32,767

Dose Reporting

Simple Dose Report
DICOM Dose Structured Report (SR)
CT Dose Check (NEMA XR-25)
NEMA Smart Dose Compliant (XR-29)

Siting

Minimum room size: 285 Sq. Ft.
Typical room size: 520 Sq. Ft.